Specifications

Installation and Operation Manual Chapter 4 Configuration
LA-210 Ver. 1.5 Configuring for Operation 4-17
LA-210
Configuration > Physical Layer > SHDSL > PCS
PCS (1)
1. Administrative Status (Up)
2. OAM (EFM) (Enable)
3. Egress Rate Limit (100000)
4. VLAN Tag Ether Type (hex) (8100)
>
f-Forward; b-backward
ESC-Previous menu; !-Main menu; &-Exit
Figure 4-14. SHDSL PCS Configuration Screen
Table
4-6. SHDSL PCS Configuration Parameters
Parameter Possible Values Remarks
PCS
1–4
Index of SHDSL PCS
Default: 1
Administrative Status
Up
Down
Sets the administrative status
Default: Up
Lines Lines that are part of the PSC.
OAM (EFM)
Enable
Disable
Single segment (link) OAM according to 802.3ah for remote
management and fault indication, including remote
loopback and MIB parameters retrieval.
Default: Disable
Egress Rate Limit
64 – 100000
kbps
Defines the rate limit for all queues together.
Default: 100000
VLAN Tag Ether Type
(hex)
0 – FFFF
Defines the VLAN Tag identifier.
Default: 8100
Configuring the Application Layer Parameters
Configuring the Internal Bridge
The internal bridge connects the unit’s ports. Configure the bridge for it to
properly process the VLAN tags to maintain priority of the data flows.
The bridge operates in transparent mode (learning is disabled) or filtered mode
(learning and filtering are enabled).
If the application mode is set to Flows, the bridge parameters do not show.