Specifications

Installation and Operation Manual Chapter 4 Configuration
LA-210 Ver. 1.5 Configuring for Management 4-9
Configuring the Network Managers
The network management stations to which the SNMP agent sends traps can be
defined or modified. Up to ten managers can be defined. Entering the IP address
and corresponding subnet mask defines each management station. In addition,
you can temporarily prevent a manager station from receiving traps by masking
the network manager.
³ To edit the manager list:
1. In the Managers List menu (Configuration > System > Management >
Managers List), press <A> to add a new network manager,
2. Move the cursor to the Manager IP cell you wish to modify by pressing the
Tab key. The selected cell is highlighted and the value appears in the Change
cell field.
3. Select Change Cell, and press <Enter> to enter a new IP address for the
selected network manager.
4. Move the cursor to the Trap field and toggle between Mask and Unmask to
mask or unmask traps for the selected management station.
LA-210
Configuration > System > Management > Managers List
IP address Trap
1. 1.1.1.1 Unmask
| 2. 2.2.2.2 Unmask
v 3. 3.3.3.3 Mask
4. 4.4.4.4 Unmask
5. 5.5.5.5 Unmask
1. Change cell … (1.1.1.1)
ESC-Previous menu; !-Main menu; &-Exit; ?-Help
Figure 4-8. Manager List Screen
LA-210
Configuration > System > Management > Managers List
Manager IP Mask ... (255.255.255.0)
Manager Trap Mask ... (Enable)
Save All
>
ESC-prev menu; !-main menu; &-exit; 1 user(s)
Figure 4-9. Manager List Screen, Add Mode