Specifications

Installation and Operation Manual Chapter 4 Configuration
LA-210 Ver. 1.5 Configuring for Management 4-3
 Select VLAN Priority to specify the priority level for the host VLAN (0–7).
LA-210
Configuration > System > Management > Host
1. IP Address … (172.17.143.140)
2. Mask … (255.255.255.0)
3. Default Gateway … (172.17.143.1)
4. Read Community … (public)
5. Write Community … ()
6. Trap Community … ()
7. Encapsulation >
S - Save
ESC-Previous menu; !-Main menu; &-Exit
Figure 4-2. Host IP Screen
LA-210
Configuration > System > Management > Host > Encapsulation
1. Host Tagging > (Tagged)
2. Host VLAN ID [1-4094] … (2)
3. Host Priority Tag [0-7] … (0)
S - Save
ESC-Previous menu; !-Main menu; &-Exit
Figure 4-3. Encapsulation Screen
Selecting the Terminal Baud Rate
The supervisory terminal is connected to LA-210 via the control port. The
management software allows you to configure the terminal baud rate.
The Baud Rate parameter is masked during a Telnet session.
³ To select the terminal baud rate:
• From the Terminal menu (Configuration > System > Terminal), select Baud
Rate and select the desired baud rate of the control port. The following baud
rates are available:
 9600 bps (default)
 19200 bps
 115200 bps.
Note