Specifications

LA-210 Ver. 1.5 Configuring for Management 4-1
Chapter 4
Configuration
This chapter describes how to configure the LA-210 for management and
operational tasks. Configuration screens are shown, and configuration
parameters explained.
The configuration screens illustrated in this chapter are taken from a terminal
screen, but most of the menus are similar to those viewed in Telnet and
ConfiguRAD.
This chapter includes the following sections:
• Configuring for management (
page 4-1 )
• Configuring for operation (
page 4-10 )
• Additional tasks (
page 4-39 ).
For instructions on accessing and navigating the screens, and a complete list of
all menu items, refer to
Chapter 3 .
4.1 Configuring for Management
This section describes how to configure the LA-210 for management functions.
Entering Device Information
The LA-210 management software allows you to assign a name for the unit, and
specify its location to distinguish it from the other devices installed in your
system. A contact person can also be assigned. Each of these fields can hold up
to 50 characters.
³ To enter device information:
• From the Device Info menu (Configuration > System > Management > Device
Information), perform the following:
1. Select Device Name, and type a name for the unit.
2. Select Location, and type a location name/description.
3. Select Contact Person, and type the name of a contact person for this
unit.
Note