Specifications

LA-210 Ver. 1.5 Indicators 3-1
Chapter 3
Operation
This chapter provides the following information for LA-210:
• Explains power-on and power-off procedures
• Provides a detailed description of the controls and indicators and their
functions
• Provides instructions for using a terminal connected to LA-210’s control port
• Describes how to navigate menus
• Describes the configuration alternatives.
For additional information on parameters displayed in the menus, refer to
Chapter 4 .
Before attempting to operate LA-210, make sure to properly complete the
installation procedures provided in
Chapter 2 .
3.1 Turning On the Unit
³ To turn on the unit:
• Connect the power cord to the mains.
The PWR indicator lights up and remains lit as long as LA-210 receives power.
Once installed, LA-210 does not require the operator’s attention, with the
exception of occasional monitoring the front panel indicators. Intervention is only
required when the unit must be configured to its operational requirements, or
when it is being tested.
3.2 Indicators
The LED indicators are located on the front panel as illustrated in Figure 3-1 .
Table 3-1 lists the functions of the LA-210 LEDs.
PWR TST
A
LM
LA-210
WAN E1LAN
Figure 3-1. LA-210 Front Panel (Plastic Enclosure)