Specifications

Installation and Operation Manual Chapter 2 Installation and Setup
LA-210 Ver. 1.5 Connecting to Power 2-5
2.8 Connecting to Power
LA-210 is equipped with a dual input AC/DC power supply. AC or DC power is
supplied to LA-210 via a standard 3-prong power input connector on the rear
panel.
Before connecting or disconnecting any communication cable, the unit must be
grounded by connecting its power cord to a power outlet with a ground terminal,
and by connecting the ground terminal on the panel (if provided) to protective
ground.
Any interruption of the protective (grounding) conductor (inside or outside the
instrument) or disconnecting the protective ground terminal may render this unit
dangerous. Intentional interruption is prohibited.
Connecting AC Power
AC power should be supplied through the 1.5m (5 ft) standard power cable
terminated by a standard 3-prong plug. The cable is provided with the unit.
³ To connect AC power:
1. Connect the power cable to the power connector on the LA-210 rear panel.
2. Connect the power cable to the mains outlet.
The unit turns on.
Connecting DC Power
DC power is supplied to LA-210 via a compatible AC/DC plug for attaching DC
power supply lines.
³ To connect DC power:
• Refer to the DC power supply connection supplement for instructions how to
wire the DC cables.
Warning