Specifications

Chapter 2 Installation and Setup Installation and Operation Manual
2-2 Required Equipment LA-210 Ver. 1.5
2.2 Package Contents
The package contains the following items:
• One LA-210 unit
• AC power cord or DC adaptor connector
• RM-33-2 rack mount kit for the units in plastic enclosure (if ordered)
2.3 Required Equipment
Hand Tools and Kits
LA-210 needs no special tools for installation. You need a screwdriver to mount
the unit in a 19-inch rack.
Power Cable
LA-210 comes equipped with an appropriate (country or region dependent)
power cord to be connected from the power socket on the rear panel to the
mains.
Cable and Connectors
Refer to the following table to determine what cables and connectors are
required for installation. For all connector pinouts, refer to
Appendix A .
Table 2-1. Required Connection Media
Interface Cable/Connector
Control port Straight RS-232/V.24 cable with DB-9 female connector for
ASCII terminal
Fast Ethernet interface RJ-45, 8-pin connection media
SHDSL Interface RJ-45, 8-pin connection media