Specifications

Quick Start Guide Installation and Operation Manual
4 Configuring LA-210 LA-210 Ver. 1.5
Configuring the Flows
This section instructs you on switching LA-210 to Flows mode and accessing the
Flows menus.
³ To set LA-210 to the Flows mode:
• In the System menu (Configuration > System), select Application Mode and
then select Save.
LA-210 is set to the Flows mode if it was previously in Bridge mode.
³ To configure the flows:
1. Navigate to the Flows menu (Configuration > Applications > Flows).
The menus for the Flow interfaces and the Flow definitions are available.
2. Define the flow interfaces and set up the flow definitions.