Specifications

Installation and Operation Manual Quick Start Guide
LA-210 Ver. 1.5 Configuring LA-210 3
Configuring the QoS
In order to prioritize the traffic, you have to choose a priority classification
method and assign priorities to the traffic queues according to the selected
method.
³ To set LA-210 to the Bridge mode (default settings):
• In the System menu (Configuration > System), select Application Mode and
then select Save.
LA-210 is set to the Bridge mode if it was previously in Flow mode.
³ To configure the priority classification method:
• From the QoS (Configuration > Applications > QoS) menu, select Priority
Classification and choose the desired traffic classification method: 802.1p,
DSCP or Per Port.
³ To assign priorities to the traffic queues:
• In the Priority Mapping menu (Configuration > Applications > QoS > Priority
Mapping), assign priorities to the traffic queues according to the selected
method.