Specifications

Quick Start Guide Installation and Operation Manual
2 Configuring LA-210 LA-210 Ver. 1.5
Starting a Terminal Session
³ To start a terminal session:
1. Turn on the control terminal PC and set its default port parameters to
9.6 kbps, 8 bits/character, 1 stop bit, no parity.
2. Set the terminal emulator to ANSI VT100 emulation (for optimal view of
system menus).
3. Set the terminal screen to show 132 characters.
4. Enter your user name and password and proceed with the management
session.
The default user name is su, and the default password is 1234.
Configuring LA-210 for Management
In order to establish a proper link with a network management station, it is
necessary to assign an IP address to the LA-210 host and add the NMS to the
manager list.
³ To assign an IP address to the LA-210 host:
• In the Host menu (Configuration > System > Management > Host), assign an
IP address to the LA-210 host.
³ To configure the manager IP addresses:
• In the Manager List menu (Configuration > System > Management > Managers
List), enter the manager IP address(es).
Configuring the Internal Bridge
This section instructs you on operating LA-210 in Bridge mode.
The internal bridge parameters, as well as the bridge ports and the VLAN
membership must be configured according to the application requirements.
³ To configure the internal bridge:
• In the Bridge menu (Configuration > Applications > Bridge), configure the
VLAN and filtering modes of the LA-210 bridge.
³ To configure the bridge ports:
• From the Bridge Port menu (Configuration> Applications > Bridge > Bridge
Port), select a bridge port and configure the necessary parameters.
³ To configure the VLAN membership:
• In the VLAN Membership menu (Configuration > Applications > Bridge > VLAN
Membership), create a new VLAN and define the egress tagged and untagged
ports which are the VLAN members.
Note