Specifications

Installation and Operation Manual Chapter 6 Diagnostics and Troubleshooting
LA-210 Ver. 1.5 Displaying Statistics 6-17
LA-210
Monitoring>Application>Flows
Flow Name ... (Put your…) Direction > (Upstream)
Fwd Green Pkts (0) Fwd Green bytes (0)
Fwd Yellow Pkts (0) Fwd Yellow bytes (0)
Dscrd Green Pkts (0) Dscrd Green bytes (0)
Dscrd Yellow Pkts (0) Dscrd Yellow bytes (0)
Dscrd Red Pkts (0) Dscrd Red bytes (0
1. Flow ID[1–8] ... (1)
2. CoS >
>
F–Forward; b–Backward; ^F–Frw(Port);^B–Bkw(Port)
ESC-prev.menu; !-main menu; &-exit 1 Mngr/s
Figure 6-19. End-to-End Statistics (15-Minute Interval)
Displaying End-to-End Statistics for OAM
You can display end-to-end connectivity and performance monitoring data for the
existing flows and the associated services. The statistics are available for the 15-
minute and 24-hour periods.
³ To display the End-to-End statistics:
1. From the End-To-End menu (Monitoring>Application>OAM>End-To-End),
select Statistics.
The Statistics menu appears.
2. From the Statistics menu, select the following:
 15 Min Intervals. OAM statistics for a selected 15-min interval
 24 Hours Counters. OAM statistics for the last 24 hours
 Service Counters. Total OAM statistics collected since the service was
enabled
3. Selected OAM statistic screen in displayed (see
Figure 6-18 and Figure 6-19 ).
Table 6-14 and Table 6-15 explain the OAM statistic parameters.
4. Type <F> or <B> to select a flow.
5. Press <Ctrl + F> or <Ctrl + B> to select an interval (1–96).
No interval selection is available for the 24-hour statistics.
Note