Specifications

Chapter 6 Diagnostics and Troubleshooting Installation and Operation Manual
6-4 Monitoring Performance LA-210 Ver. 1.5
Parameter Description
Speed & Duplex The current data rate and duplex mode of the link
(100 – full, 100 –half, 10 – full, or 10 - half).
Flow Control Whether flow control is enabled or disabled.
Displaying the SHDSL Line Status
³ To display the SHDSL Line status:
1. From the SHDSL menu (Monitoring > Physical Ports > Line), select Status.
The SHDSL Status screen appears (see
Figure 6-7 ).
LA-210
Main Menu > Monitoring > Physical Ports > SHDSL > Status
1. Line >
2. PCS (if TC Layer = 64-65-octet) >
>
ESC-Previous menu; !-Main Menu; &-Exit
Figure 6-5. SHDSL Screen
2. From the SHDSL menu (Monitoring > Physical Ports > SHDSL > Status), select
Line.
The SHDSL Line Status screen appears (see
Figure 6-7 ).
3. To view an additional SHDSL line, press <F> or <B> to scroll forward or
backward through the list respectively.
LA-210
Main Menu > Monitoring > Physical Ports > SHDSL > Status > Line
Line (1)
Administrative Status (Up)
Operation Status (Up)
SHDSL Mode (STU-R)
PSD Mask (Symmetric)
SHDSL Transmission Mode (Annex B/G)
Wiring (2 Wire)
Line State (PreActivation)
Line Rate (0)
Current Noise Margin (0)
Current Loop Attenuation (0)
f-Forward; b-Backward
ESC-Previous menu; !-Main Menu; &-Exit
Figure 6-6. SHDSL Line Status Screen