Specifications

Installation and Operation Manual Chapter 6 Diagnostics and Troubleshooting
LA-210 Ver. 1.5 Monitoring Performance 6-3
Table 6-1. Interface Status Parameters
Parameter Description
Interface Description Fast Ethernet and SHDSL port
Type The type of the interface
Activation Whether the interface is enabled (Up) or disabled (Down),
as user defined via the Ethernet and SHDSL menus (see
Chapter 4 ).
Operation Actual operational status of the link (Up or Down).
Displaying the Physical Port Status
You can view the status of the unit’s physical ports.
For a description of the Ethernet and SHDSL port statistics, refer to
Displaying
Statistics
.
Displaying the Ethernet Port Status
³ To display the Ethernet port status:
1. From the Ethernet menu (Monitoring > Physical Ports > Ethernet), select
Status.
The Fast Ethernet Status screen appears (see
Figure 6-4 ). The parameters
are described in
Table 6-2 .
2. Press <F> to select the port number.
LA-210
Main Menu > Monitoring > Physical Ports > Ethernet > Status
Port (1)
Administrative Status (Enable)
Operation Status (Up)
Speed & Duplex (100Mbps – Full Duplex)
Flow Control (Enable)
F - Forward; B - Backward
ESC-Previous menu; !-Main menu; &-Exit; ?-Help
Figure 6-4. Ethernet Status Screen
Table
6-2. Ethernet Status Parameters
Parameter Description
Port The port slot number to be handled.
Admistrative Status Whether the interface is enabled or disabled.
Operation Status The actual operational status of the link (Up or Down).