Specifications

Installation and Operation Manual Chapter 5 Configuring a Flow-Based Point-To-Point Application
LA-210 Ver. 1.5 Testing the Flow Based Configuration 5-31
³ To define CIR and EIR settings:
1. Configure Service777_pbit_4 to CIR = 10000 Kbps and EIR = 2000 Kbps.
2. Configure Service555_pbit_7 to CIR = 1000 Kbps and EIR = 2000 Kbps.
LA-210
Configuration>Applications>QoS>Bandwidth Profiles
1. ID[1 - 8] ... (2)
2. Name ... (BW_for_service_777)
3. CIR(Kbps)[0 - 100000] ... (10000)
4. CBS(Bytes)[0 - 32000] ... (12176)
5. EIR(Kbps)[0 - 100000] ... (2000)
6. EBS(Bytes)[0 - 32000] ... (12176)
>
a-Add; f-Forward; b-Backward; d-Delete
ESC-prev.menu; !-main menu; &-exit 1 M/ 1 C
Figure 5-53. Bandwidth Profile for Service777 - CIR = 10 Mbps, EIR = 2 Mbps
LA-210
Configuration>Applications>QoS>Bandwidth Profiles
1. ID[1 - 8] ... (3)
2. Name ... (BW_for_service_555)
3. CIR(Kbps)[0 - 100000] ... (1000)
4. CBS(Bytes)[0 - 32000] ... (12176)
5. EIR(Kbps)[0 - 100000] ... (2000)
6. EBS(Bytes)[0 - 32000] ... (12176)
>
a-Add; f-Forward; b-Backward; d-Delete
ESC-prev.menu; !-main menu; &-exit 1 M/ 1 C
Figure 5-54. Bandwidth Profile for Service555 - CIR = 1 Mbps, EIR = 2 Mbps
3. For the SHDSL connection, navigate to the PCS menu (Configuration>Physical
Layer>SHDSL>PCS) and set the Egress Rate Limit to 1000 Kbps (
Figure 5-39 ).
LA-210 forwards some green packets of both Service555_pbit_7 and
Service777_pbit_4 and drops the remainder.
³ To test the new mappings:
1. Start the VLC server to transmit the movie and the client to view the result.
2. Using a serial connection, connect the server PC to ETX-202 Server and log on
to it.
3. Navigate to the Ping menu (
Figure 5-32 ), enter the IP address of ETX-202
Client and start pinging EX-202 Client.
4. Following the instructions above, ping ETX-202 Server from ETX-202 Client.