Specifications

Chapter 5 Configuring a Flow-Based Point-To-Point Application Installation and Operation Manual
5-30 Testing the Flow Based Configuration LA-210 Ver. 1.5
LA-210
*Monitoring>Application>Flows>CoS
Flow Name ... (VLAN777-555)
Flow ID[1 - 8] ... (1) Direction > (Upstream)
Fwd Green Packets (44158) Fwd Green bytes (60852602)
Fwd Yellow Packets (0) Fwd Yellow bytes (0)
Dscrd Green Packet (16430) Dscrd Green bytes (22635579)
Dscrd Yellow Packe (0) Dscrd Yellow bytes (31694)
Dscrd Red Packets (0) Dscrd Red bytes (0)
1. CoS ID[0 - 7] ... (3)
>
f-Forward; b-Backward; c-Clear Statistics
ESC-prev.menu; !-main menu; &-exit 1 M/ 1 C
Figure 5-52. CoS Statistics – Service777_p.bit_4 (CoS ID 3)
The CoS statistics indicate the following:
• Service555_pbit_7 (CoS 6):
All yellow packets are transferred since they are associated with CoS 6, which
are transmitted at a higher priority than the ones associated with CoS 3.
• Service777_pbit_4 (CoS 3):
Some green packets are transferred and others are dropped since the Egress
rate limit (SHDSL) is set to 1 Mbps and Service555 has a higher priority,
causing its packets to be transferred first.
Defining the Same Priority to All Frames
Follow the instructions under Configuring the Units for Advanced
Configurations to map both p.bit 7 and p.bit 4 to CoS 6.
This means that frames with p.bit 4 and 7 are mapped to CoS 6 and therefore to
the same queue.