Specifications

Installation and Operation Manual Chapter 5 Configuring a Flow-Based Point-To-Point Application
LA-210 Ver. 1.5 Testing the Flow Based Configuration 5-25
1. Set the CIR to 300 Kbps and the EIR to 200 Kbps ( Figure 5-43 ).
2. For the SHDSL connection, navigate to the PCS menu (Configuration>Physical
Layer>SHDSL>PCS) and set the Egress Rate Limit to 1000 Kbps.
All green and yellow packets are forwarded. The red ones are dropped.
LA-210
Configuration>Applications>QoS>Bandwidth Profiles
1. ID[1 - 8] ... (2)
2. Name ... (BW_for_service_777)
3. CIR(Kbps)[0 - 100000] ... (500)
4. CBS(Bytes)[0 - 32000] ... (12176)
5. EIR(Kbps)[0 - 100000] ... (200)
6. EBS(Bytes)[0 - 32000] ... (12176)
>
a-Add; f-Forward; b-Backward; d-Delete
ESC-prev.menu; !-main menu; &-exit 1 M/ 1 C
Figure 5-43. Bandwidth Profile - CIR = 0.5 Mbps, EIR = 0.2 Mbps
Since the movie transmits at around 1.5 Mbps, CIR = 0.5 Mbps, EIR =
0.2 Mbps and the SHDSL port has been limited to 1 Mbps, all green (CIR)
and yellow (EIR) packets are forwarded and red packets are dropped
(
Figure 5-44 ).
LA-210
*Monitoring>Application>Flows>CoS
Flow Name ... (VLAN777-555)
Flow ID[1 - 8] ... (1) Direction > (Upstream)
Fwd Green Packets (664) Fwd Green bytes (926016)
Fwd Yellow Packets (170) Fwd Yellow bytes (234260)
Dscrd Green Packet (0) Dscrd Green bytes (0)
Dscrd Yellow Packe (0) Dscrd Yellow bytes (0)
Dscrd Red Packets (116) Dscrd Red bytes (159848)
1. CoS ID[0 - 7] ... (3)
>
f-Forward; b-Backward; c-Clear Statistics
ESC-prev.menu; !-main menu; &-exit 1 M/ 1 C
Figure 5-44. CoS Statistics - CIR = 0.5 Mbps, EIR = 0.2 Mbps, Egress Rate Limit = 1 Mbps