Specifications

Chapter 5 Configuring a Flow-Based Point-To-Point Application Installation and Operation Manual
5-24 Testing the Flow Based Configuration LA-210 Ver. 1.5
1. CoS ID[0 - 7] ... (3)
>
f-Forward; b-Backward; c-Clear Statistics
ESC-prev.menu; !-main menu; &-exit 1 M/ 1 C
Figure 5-40. CoS Statistics - CIR = 5 Mbps, EIR = 3 Mbps, Egress Rate Limit = 1 Mbps
Since the movie transmits at around 1.5 Mbps, CIR = 5 Mbps,
EIR = 3 Mbps and the SHDSL port has been limited to 1 Mbps, some green
packets were dropped (
Figure 5-40 ).
4. Set the CIR to 500 Kbps and the EIR to 3000 Kbps (
Figure 5-41 ).
5. For the SHDSL connection, navigate to the PCS menu (Configuration>Physical
Layer>SHDSL>PCS) and set the Egress Rate Limit to 1000 Kbps.
LA-210
Configuration>Applications>QoS>Bandwidth Profiles
1. ID[1 - 8] ... (2)
2. Name ... (BW_for_service_777)
3. CIR(Kbps)[0 - 100000] ... (500)
4. CBS(Bytes)[0 - 32000] ... (12176)
5. EIR(Kbps)[0 - 100000] ... (3000)
6. EBS(Bytes)[0 - 32000] ... (12176)
>
a-Add; f-Forward; b-Backward; d-Delete
ESC-prev.menu; !-main menu; &-exit 1 M/ 1 C
Figure 5-41. Bandwidth Profile - CIR = 0.5 Mbps, EIR = 3 Mbps
Since content is being transmitted at around 1.5 Mbps, CIR = 0.5 Mbps, EIR =
3 Mbps and the SHDSL port has been limited to 1 Mbps, all green packets
(CIR) are forwarded and some yellow packets (EIR) are dropped (
Figure 5-42 ).
LA-210
*Monitoring>Application>Flows>CoS
Flow Name ... (VLAN777-555)
Flow ID[1 - 8] ... (1) Direction > (Upstream
)
Fwd Green Packets (490) Fwd Green bytes (686244)
Fwd Yellow Packets (448) Fwd Yellow bytes (622856)
Dscrd Green Packets (0) Dscrd Green bytes (0)
Dscrd Yellow Packets (337) Dscrd Yellow bytes (475410)
Dscrd Red Packets (0) Dscrd Red bytes (0)
1. CoS ID[0 - 7] ... (3)
>
f-Forward; b-Backward; c-Clear Statistics
ESC-prev.menu; !-main menu; &-exit 1 M/ 1 C
Figure 5-42. CoS Statistics - CIR = 0.5 Mbps, EIR = 3 Mbps, Egress Rate Limit = 1 Mbps