Specifications

Installation and Operation Manual Chapter 5 Configuring a Flow-Based Point-To-Point Application
LA-210 Ver. 1.5 Testing the Flow Based Configuration 5-23
³ To test the bandwidth profiles for the SHDSL interface at various rates:
1. For BW_For_Service_777, set the CIR to 5000 Kbps and the EIR to 3000 Kbps.
LA-210
Configuration>Applications>QoS>Bandwidth Profiles
1. ID[1 - 8] ... (2)
2. Name ... (BW_for_service_777)
3. CIR(Kbps)[0 - 100000] ... (5000)
4. CBS(Bytes)[0 - 32000] ... (12176)
5. EIR(Kbps)[0 - 100000] ... (3000)
6. EBS(Bytes)[0 - 32000] ... (12176)
>
a-Add; f-Forward; b-Backward; d-Delete
ESC-prev.menu; !-main menu; &-exit 1 M/ 1 C
Figure 5-38. Bandwidth Profile - CIR = 5 Mbps, EIR = 3 Mbps
2. For the SHDSL connection, navigate to the PCS menu (Configuration>Physical
Layer>SHDSL>PCS) and set the Egress Rate Limit to 960 Kbps (
Figure 5-39 ).
LA-210
Configuration>Physical Layer>SHDSL>PCS
PCS (1)
1. Administrative Status (Up)
2. OAM (EFM) (Disable)
3. Egress Rate Limit(Kbps)[64 - 100000] ... (960)
4. VLAN Tag Ether Type (hex)[0 - ffff] ... (8100)
>
ESC-prev.menu; !-main menu; &-exit 1 M/ 1 C
Figure 5-39. Modifying the Egress Rate Limit for SHDSL
3. Navigate back to Monitoring>Application>Flows>CoS.
Some green packets are dropped.
LA-210
*Monitoring>Application>Flows>CoS
Flow Name ... (VLAN777-555)
Flow ID[1 - 8] ... (1) Direction > (Upstream
)
Fwd Green Packets (2744) Fwd Green bytes (3787644)
Fwd Yellow Packets (0) Fwd Yellow bytes (0)
Dscrd Green Packet (596) Dscrd Green bytes (821288)
Dscrd Yellow Packe (0) Dscrd Yellow bytes (0)
Dscrd Red Packets (0) Dscrd Red bytes (0)