Specifications

Chapter 5 Configuring a Flow-Based Point-To-Point Application Installation and Operation Manual
5-20 Testing the Flow Based Configuration LA-210 Ver. 1.5
Policer Testing
To perform the policer testing, you have to connect the serial port of LA-210 to a
PC’s COM port with a terminal.
Connect by terminal to LA-210, located on the server side.
The Bandwidth profile of CoS 3 (service 777 p.bit 4) has been previously
configured as follows:
LA-210
Configuration>Applications>QoS>Bandwidth Profiles
1. ID[1 - 8] ... (2)
2. Name ... (BW_for_service_777)
3. CIR(Kbps)[0 - 100000] ... (5000)
4. CBS(Bytes)[0 - 32000] ... (12176)
5. EIR(Kbps)[0 - 100000] ... (2000)
6. EBS(Bytes)[0 - 32000] ... (12176)
Figure 5-33. Previously configured Bandwidth Profile - CIR = 5 Mbps
CIR is the committed bandwidth that the service provider guarantees to the user,
therefore they are called green packets.
EIR means that the service for these frames is not guaranteed and depends on
available bandwidth. These packets are called yellow packets.
In the current configuration, you will use EIR = 5 Mbps and EIR = 2 Mbps.
³ To test the bandwidth profiles:
1. While viewing the movie from the client PC, navigate to
Monitoring>Application>Flows>CoS.
The CoS menu appears, indicating that all packets are green.