Specifications

Chapter 5 Configuring a Flow-Based Point-To-Point Application Installation and Operation Manual
5-16 Configuring the Units for Advanced Configurations LA-210 Ver. 1.5
LA-210
Configuration>Applications>Flows>Flow Definition>CoS
(Flow 1 UNI ETH-1)
1. ID[0 - 7] ... (3)
2. Name ... (Service555_pbit_7)
3. Ingress BW Profile > (Undefined)
>
a-Add; f-Forward; b-Backward; d-Delete
ESC-prev.menu; !-main menu; &-exit 1 M/ 1 C
Figure 5-27. Adding a Service
³ To bind a BW profile to Service555_pbit_7:
1. Press <F> or <B> to navigate to Service555_pbit_7.
2. In the desired CoS menu, select Ingress BW Profile.
The ingress BW profile CoS appears.
LA-210
..>Applications>Flows>Flow Definition>CoS>Ingress BW Profile (Undefined)
1. Undefined
2. DefaultIngressBW1
3. BW_for_Service777
4. BW_for_Service555
>
ESC-prev.menu; !-main menu; &-exit 1 M/ 1 C
Figure 5-28. Ingress BW Profiles
3. Select BW_for_Service555.
The BW profile is bound to Service555_pbit_7 (
Figure 5-29 ).
4. Press <S> to save the settings.
LA-210
Configuration>Applications>Flows>Flow Definition>CoS
(Flow 1 UNI ETH-1)
1. ID[0 - 7] ... (3)
2. Name ... (Service555_pbit_7)
3. Ingress BW Profile > (BW_for_service_555)
>
a-Add; f-Forward; b-Backward; d-Delete
ESC-prev.menu; !-main menu; &-exit 1 M/ 1 C
Figure 5-29. Ingress BW Profile BW_for_service_555 bound to Service555_pbit_7