Specifications

Installation and Operation Manual Chapter 5 Configuring a Flow-Based Point-To-Point Application
LA-210 Ver. 1.5 Configuring the Units for Advanced Configurations 5-15
LA-210
Configuration>Applications>Flows>Flow Definition>CoS
(Flow 1 UNI ETH-1)
>
a-Add
ESC-prev.menu; !-main menu; &-exit 1 M/ 1 C
Figure 5-25. CoS Screen
1. To add a service, press <A>.
CoS parameters appear.
LA-210
*Configuration>Applications>Flows>Flow Definition>CoS
(Flow 1 UNI ETH-1)
1. ID[0 - 7] ... (3)
2. Name ... (Service777_pbit_4)
3. Ingress BW Profile > (Undefined)
>
s-Save
ESC-prev.menu; !-main menu; &-exit 1 M/ 1 C
Figure 5-26. CoS Parameters
2. Select ID and enter 3 (cos 3 for p.bit 4), and then press <Enter>.
3. Assign a name to the service, for example Service777_pbit_4, and then press
<Enter>.
The service is added.
³ To add an additional service:
1. In the CoS menu (Configuration>Applications>Flows>Flow Definition>CoS),
press <A> to add an additional service.
2. Select ID and enter 6 (CoS 6 for p.bit 7).
3. Select Name and assign a name to the service, for example
Service555_pbit_7, and then press <Enter>.
The service is added.