Specifications

Installation and Operation Manual Chapter 5 Configuring a Flow-Based Point-To-Point Application
LA-210 Ver. 1.5 Configuring the Units for Advanced Configurations 5-13
7. Ingress BW Profile > (Undefined)
8. Encapsulation >
9. CoS >
>
a-Add; f-Forward; b-Backward; d-Delete; ^F-Frw(Port); ^B-Bkw(Port)
ESC-prev.menu; !-main menu; &-exit 1 M/ 1 C
Figure 5-20. Flow Definition
³ To define a bandwidth profile for VLAN 777:
1. Navigate to the Bandwidth Profiles menu
(Configuration>Applications>QoS>Bandwidth Profiles)
LA-210
Configuration>Applications>QoS>Bandwidth Profiles
1. ID[1 - 8] ... (1)
2. Name ... (DefaultIngressBW1)
3. CIR(Kbps)[0 - 100000] ... (100000)
4. CBS(Bytes)[0 - 32000] ... (12176)
5. EIR(Kbps)[0 - 100000] ... (0)
6. EBS(Bytes)[0 - 32000] ... (12176)
>
a-Add; f-Forward; b-Backward
ESC-prev.menu; !-main menu; &-exit 1 M/ 1 C
Figure 5-21. Bandwidth Profile
2. To add a new profile, press <A>.
LA-210
*Configuration>Applications>QoS>Bandwidth Profiles
1. ID[1 - 8] ... (2)
2. Name ... (Put your string here)
3. CIR(Kbps)[0 - 100000] ... (100000)
4. CBS(Bytes)[0 - 32000] ... (12176)
5. EIR(Kbps)[0 - 100000] ... (0)
6. EBS(Bytes)[0 - 32000] ... (12176)
>
s-Save
ESC-prev.menu; !-main menu; &-exit 1 M/ 1 C
Figure 5-22. Adding a Bandwidth Profile
3. Under Name, enter the desired bandwidth profile name, for example
BW_for_service_777.
4. Set CIR to 5000 Kbps and EIR to 2000 Kbps .