Specifications

Chapter 5 Configuring a Flow-Based Point-To-Point Application Installation and Operation Manual
5-12 Configuring the Units for Advanced Configurations LA-210 Ver. 1.5
LA-210
Configuration>Applications>Flows>Flow Definition
(Flow 1 UNI ETH-1)
1. ID[1 - 8] ... (1)
2. Name ... (VLAN777-555)
Interface (1)
3. User port Mapping Mode (User Mapping)
4. Classification >
5. CoS Method (Profile)
6. CoS profile > (CoSDefaultProfile1)
7. Ingress BW profile > (Undefined)
8. Encapsulation >
9. CoS >
>
a-Add; f-Forward; b-Backward; d-Delete; ^F-Frw(Port); ^B-Bkw(Port)
ESC-prev.menu; !-main menu; &-exit 1 M/ 1 C
Figure 5-18. Flow Definition
2. Set the CoS Method parameter to Profile.
3. Select CoS Profile.
The existing CoS profiles appear listed.
4. Select the profile you added. The example uses the name CosProfile_no_1.
LA-210
...>Applications>Flows>Flow Definition>CoS profile (CoSDefaultProfile1)
1. CoSDefaultProfile1
2. CosProfile_no_1
>
ESC-prev.menu; !-main menu; &-exit 1 M/ 1 C
Figure 5-19. CoS Profiles
LA-210
Configuration>Applications>Flows>Flow Definition
(Flow 1 UNI ETH-1)
1. ID[1 - 8] ... (1)
2. Name ... (VLAN777-555)
Interface (1)
3. User Port Mapping Mode (User Mapping)
4. Classification >
5. CoS Method (Profile)
6. CoS Profile > (CosProfile_no_1)