Specifications

Installation and Operation Manual Chapter 5 Configuring a Flow-Based Point-To-Point Application
LA-210 Ver. 1.5 Configuring the Units for Advanced Configurations 5-11
Figure 5-16. New CoS Profile
5. Select Mapping.
The Mapping screen appears.
6. Set Tag (p.bit) 4 to 3 and Tag (p.bit) 7 to 6.
LA-210
Configuration>Applications>QoS>Cos Profiles>Mapping
1. Tag 0[0 - 7] ... (0)
2. Tag 1[0 - 7] ... (1)
3. Tag 2[0 - 7] ... (2)
4. Tag 3[0 - 7] ... (3)
5. Tag 4[0 - 7] ... (3)
6. Tag 5[0 - 7] ... (5)
7. Tag 6[0 - 7] ... (6)
8. Tag 7[0 - 7] ... (6)
>
ESC-prev.menu; !-main menu; &-exit 1 M/ 1 C
Figure 5-17. Mapping p.bits to Flow 1
³ To link Flow 1 to the newly created CoS profile:
1. Navigate to the Flow definition menu
(Configuration>Applications>Flows>Flow Definition).