Specifications

Chapter 5 Configuring a Flow-Based Point-To-Point Application Installation and Operation Manual
5-10 Configuring the Units for Advanced Configurations LA-210 Ver. 1.5
Figure 5-14. Mapping Priority Bits (p.bits) to Classes of Service (CoS) - Scheme
³ To map p.bits to CoS:
1. Navigate to the CoS Profiles menu (Configuration>Applications>QoS>Cos
Profiles).
A default CoS profile with default mapping appears.
LA-210
Configuration>Applications>QoS>Cos Profiles
1. ID[1 - 8] ... (1)
2. Name ... (CoSDefaultProfile1)
3. Ingress Priority Method > (IEEE 802.p)
4. Mapping >
>
a-Add; f-Forward; b-Backward
ESC-prev.menu; !-main menu; &-exit 1 M/ 1 C
Figure 5-15. CoS Profile
2. Press <A> to add a new CoS profile.
A CoS profile with default parameters appears.
3. Assign a name of your choice to the profile, for example CosProfile_no_1.
4. Press <S> to save your settings.
LA-210
Configuration>Applications>QoS>Cos Profiles
1. ID[1 - 8] ... (2)
2. Name ... (CosProfile_no_1)
3. Ingress Priority Method > (IEEE 802.p)
4. Mapping >
>
s-Save
ESC-prev.menu; !-main menu; &-exit 1 M/ 1 C