Specifications

Installation and Operation Manual Chapter 5 Configuring a Flow-Based Point-To-Point Application
LA-210 Ver. 1.5 Configuring the Units for Advanced Configurations 5-9
ETX-202
Configuration>Bridge>Bridge Port
Port Label > (4)
Bridge port > (User 2)
1. Port\Stacking VID[1 - 4094] ... (555)
2. Default Priority Tag [0 - 7] ... (7)
3. Tag Handling (Stack)
Please select item <1 to 3>
F-Forward
ESC-prev.menu; !-main menu; &- exit 1 M/ 1 C
Figure 5-13. ETX-202 Client User Port 2– Bridge Port Menu
This application allows using ETX-202 Version 3.5 or higher. Depending on the
version in use, additional menu items may be visible. Do not modify the
associated settings if not instructed otherwise.
5.3 Configuring the Units for Advanced
Configurations
This chapter explains how to map priority bits to classes of service. You can map
each p.bit to any CoS, thus setting different priorities via the CoS profile
configuration. You also can set a fixed p.bit per flow.
In the current example you will map p.bits to classes of service (CoS) as follows:
• Map p.bit 7 to CoS 6.
• Map p.bit 4 to CoS 3.
• Define two services for each CoS, VLAN 777 with CoS 3 (p.bit 4) and
VLAN 555 with CoS 6 (p.bit 7).
In addition, you can determine the bandwidth options (policer) for each
service.
• Map CoS to Queue. This mapping is not configurable, but it is possible to set
the queue definition to Strict or WFQ.
Note