Specifications

Chapter 5 Configuring a Flow-Based Point-To-Point Application Installation and Operation Manual
5-8 Configuring the Units for Basic Applications LA-210 Ver. 1.5
ETX-202
Configuration>System>Management>Host>Encapsulation
1. Host Tagging (Tagged)
2. Host VLAN ID[1 - 4094] ... (333)
3. Host VLAN Priority[0 - 7] ... (7)
4. Security Definition > (All)
>
Please select item <1 to 4>
ESC-prev.menu; !-main menu; &-exit 1 M/ 1 C
Figure 5-11. ETX-202 Client – Enabling Host Tagging
2. Select Host Tagging.
Host Tagging toggles to Enabled.
3. Press <S> to save this setting.
³ To configure the bridge port:
1. Navigate to the Bridge Port menu (Configuration>Bridge>Bridge Port).
2. Navigate to User Port 1 and User Port 2 and configure the respective
parameters as illustrated below.
ETX-202
Configuration>Bridge>Bridge Port
Port Label > (3)
Bridge port > (User 1)
1. Port\Stacking VID[1 - 4094] ... (777)
2. Default Priority Tag [0 - 7] ... (4)
3. Tag Handling (Stack)
Please select item <1 to 3>
F-Forward
ESC-prev.menu; !-main menu; &- exit 1 M/ 1 C
Figure 5-12. ETX-202 Client User Port 1– Bridge Port Menu