Specifications

Installation and Operation Manual Chapter 5 Configuring a Flow-Based Point-To-Point Application
LA-210 Ver. 1.5 Configuring the Units for Basic Applications 5-7
LA-210
Configuration>Applications>Flows>Flow Definition>Encapsulation
(Flow 1 UNI ETH-1)
1. SP-Vlan Action (Stacking)
2. SP-VLAN[1 - 4094] ... (10)
3. Marking Method (Profile)
4. Marking Profile > (MarkingDefaultProfile1)
5. CE-VLAN action > (Preserve)
>
ESC-prev.menu; !-main menu; &-exit 1 M/ 1 C
Figure 5-9. Encapsulation Screen
Configuring ETX-202 Server and Client
In addition to the IP settings, you have to enable Host Tagging and then,
configure the VLAN and the bridge port. Except for the IP address, both ETX-202
units are configured with the same parameters.
³ To configure the IP settings:
1. Navigate to the Host menu (Configuration>Management>Host>Encapsulation)
and configure the IP settings as illustrated below.
ETX-202
Configuration>System>Host
1. IP Address ... (172.17.192.25)
2. IP Mask ... (255.255.255.0)
3. Default Gateway ... (172.17.192.1)
4. Bind (Bridge Port)
5. DHCP (Disable)
6. Default IP ... (0.0.0.0)
>
ESC-prev.menu; !-main menu; &-exit 1 M/ 1 C
Figure 5-10. ETX-202 Client - Host Menu
2. Press <S> to save the IP settings.
³ To configure the VLAN settings:
1. Navigate to the Encapsulation menu
(Configuration>System>Management>Host>Encapsulation).