Specifications

Chapter 5 Configuring a Flow-Based Point-To-Point Application Installation and Operation Manual
5-6 Configuring the Units for Basic Applications LA-210 Ver. 1.5
³ To add VLANs as members to the flow.
1. To define VLAN IDs as members of Flow 1, navigate to CE VLAN ID Members
(Configuration>Applications>Flows>Flow Definition>Classification>CE VLAN
Members).
2. Enter 777 and press <S> to save your settings.
VLAN 777 is added as a member to Flow 1.
3. Press <A> to add an additional member.
4. Enter 555 and press <S> to save your settings.
VLAN 555 is added as an additional member to Flow 1.
LA-210
Configuration>Applications>Flows>Flow Definition>Classification>CE VLAN ID
Members (555,777)
1. [1 - 4094]... (555)
2. [1 - 4094]... (777)
3. Delete Range...
>
ESC-prev.menu; !-main menu; &-exit; A-add 1 M/ 1 C
Figure 5-7. CE VLAN ID Members Menu
5. Press <ESC> to return to the Classification screen.
The Classification screen reflects the new VLAN IDs.
LA-210
Configuration>Applications>Flows>Flow Definition>Classification
(Flow 1 UNI ETH-1)
1. CE VLAN ID Members > (555,777)
>
ESC-prev.menu; !-main menu; &-exit 1 M/ 1 C
Figure 5-8. Classification Screen
³ To define the SP-VLAN:
1. In the Encapsulation menu (Configuration>Applications>Flows>Flow
Definition>Encapsulation), select SP-VLAN and enter 10.
2. The SP-VLAN 10 is added to the flow on the service provider side.