Specifications

Installation and Operation Manual Chapter 5 Configuring a Flow-Based Point-To-Point Application
LA-210 Ver. 1.5 Configuring the Units for Basic Applications 5-5
³ To add a flow definition:
1. Navigate to the Flow Definition screen
(Configuration>Applications>Flows>Flow Definition)
The Flow Definition screen appears.
2. Add a flow by pressing <A>.
Flow Definition parameters appear.
3. Assign the name VLAN777-555 to this flow and then press <S>.
LA-210
Configuration>Applications>Flows>Flow Definition
(Flow 1 UNI ETH-1)
1. ID[1 - 8] ... (1)
2. Name ... (VLAN777-555)
Interface (1)
3. User port Mapping Mode (User Mapping)
4. Classification >
5. CoS Method (Profile)
6. CoS profile > (CoSDefaultProfile1)
7. Ingress BW profile > (Undefined)
8. Encapsulation >
9. CoS >
>
a-Add; f-Forward; b-Backward; d-Delete; ^F-Frw(Port); ^B-Bkw(Port)
ESC-prev.menu; !-main menu; &-exit 1 M/ 1 C
Figure 5-5. Flow Definition Menu
4. In the Flow Interfaces menu (Configuration>Applications>Flows>Flow
Interfaces), verify that the flow is classified according to CE-VLAN ID.
LA-210
Configuration>Applications>Flows>Flow Interfaces
Interface ID[1 - 5] (1)
Port > (ETH-1)
1. Flow Key > (CE-VLAN ID)
2. Defaults >
>
f-Forward; b-Backward
ESC-prev.menu; !-main menu; &-exit 1 M/ 1 C
Figure 5-6. Flow Interfaces Menu