Specifications

Chapter 5 Configuring a Flow-Based Point-To-Point Application Installation and Operation Manual
5-2 Configuring the Units for Basic Applications LA-210 Ver. 1.5
Figure 5-2. Application Setup and Cable Connections
³ To connect the units to the PCs and to each other:
1. Use a network cable to connect PC-1 Server and ETX-202 Server’s
User Port 1.
2. Use a network cable to connect ETX-202 Server’s Net Port 1 to
the DSLAM.
3. Use a DSL cable to connect the SHDSL.bis port of LA-210 to the DSLAM.
4. Use a network cable to connect PC-1 Client and ETX-202 Client’s User Port 1.
5. Use a network cable to connect ETX-202 Client’s Net Port 1 to
LA-210’s Port 1.
5.2 Configuring the Units for Basic Applications
Configuration Overview
You must configure the following to deploy LA-210 and ETX-202 units in this
application:
• System parameters (host IP, default gateway)
• Flow Interface configuration
• Flows.