Specifications

LA-210 Ver. 1.5 Assembling the Hardware 5-1
Chapter 5
Configuring a Flow-Based
Point-To-Point Application
This chapter provides detailed instructions on assembling, configuring and using a
flow-based point-to-point application.
The configuration used for the application is illustrated below. It includes a server
PC and a client PC, enabling you for example to screen a movie and
simultaneously testing the performance at different bandwidths and priorities.
Two ETX-202 units represent the termination unit, providing a demarcation point
between the LAN and the management and client stations.
Figure 5-1. Typical Application
5.1 Assembling the Hardware
The section below lists required equipment and instructs you on connecting
cables to each unit.
Required Equipment
The hardware configuration requires the following:
• One LA-210 unit
• One DSLAM unit
• Two ETX-202 units (ETX-202 Client and ETX-202 Server)
• Two PCs
• Four Ethernet cables
• One DSL cable.
Connecting Cables
Figure 5-2 illustrates the required cable connections.