Specifications

Installation and Operation Manual Chapter 4 Configuration
LA-210 Ver. 1.5 Additional Tasks 4-49
LA-210
Utilities > File Transfer > TFTP
Status (No operation)
Error (No error)
1. Server IP Address (0.0.0.0)
2. Remote File name ()
3. File Type (Configuration)
4. Command >
ESC-Previous menu; !-Main menu; &-Exit; ?-Help
Figure 4-47. TFTP Screen
Resetting LA-210
This section describes two types of reset functions:
• Resetting configuration parameters to default settings
• Overall reset of the device
• Reset the PCS.
Resetting to the Default Settings
Using the terminal application, you can reset the unit to its default settings.
³ To reset to the default settings:
1. From the System menu (Configuration > System), select Factory Defaults.
The following message appears:
The device will restart with default configuration, proceed?
(Y/N)
2. Press <Y> to confirm the reset.
All parameters are reset to the factory default, and the unit is reset.
Resetting the Unit
You can perform an overall reset of the unit.
³ To reset LA-210:
1. From the Utilities menu, select Reset Device.
The following confirmation message appears:
The device will restart. Do you want to proceed? (Y/N).
2. Press <Y> to confirm the reset.
The device resets.