Specifications

Installation and Operation Manual Chapter 4 Configuration
LA-210 Ver. 1.5 Configuring for Operation 4-33
Configuring the Class of Service
This section instructs you on defining a class of service for a flow.
³ To define a class of service (CoS):
1. From the Flow Definition menu (Configuration > Applications > Flows > Flow
Definition), select CoS.
The CoS menu appears.
2. Define the services as detailed below.
LA-210
Configuration > Applications > Flows > Flow Definition > CoS
(Flow 1 UNI ETH-1)
1. ID [0 – 7] > (0)
2. Name ... (Name string)
3. Ingress BW Profile (DefaultBW1)
ESC-Previous menu; !-Main menu; &-Exit
Figure 4-32. Flows Definition - CoS
Table
4-16. Flows Definition - CoS
Parameter Possible Values Remarks
ID 0 – 7 The service associated with the flow displayed at the
top of the menu.
Note: This parameter displays for UNI ports only.
Name Name string A name assigned to the service.
Ingress BW Profile 0, 1 – 8 Ingress bandwidth profile. 0 means no profile
specified.