Specifications

Chapter 4 Configuration Installation and Operation Manual
4-32 Configuring for Operation LA-210 Ver. 1.5
LA-210
Configuration > Applications > Flows > Flow Definition >
Encapsulation
()
1. SP-VLAN Action > (Stack)
2. SP-VLAN[1 - 4094] ... (0)
3. Marking (Profile)
4. Marking Value > (0)
5. CE-VLAN Action > (Preserve)
ESC-Previous menu; !-Main menu; &-Exit
Figure 4-31. Flows Definition - Encapsulation
Table
4-15. Flows Definition - Encapsulation
Parameter Possible Values Remarks
SP-VLAN Action None
Stack
Defines the SP-VLAN action for the current flow.
Default: Stack
Note: This parameter displays for UNI ports only.
SP-VLAN 0, 1 – 4094 The VLAN that will be added to the flow when it
egresses from the network.
Default: 0 (no VLAN specified)
Note: This parameter displays for UNI ports only.
Marking Fixed
Profile
The method defined for marking, either using an
encoding table defined per flow or using a fixed
value.
Fixed - Fixed priority value will be marked on SP-TAG.
Profile - Marking will be derived from the marking
profile attached to the Flow–MIB value 255.
Note: This parameter displays for UNI ports only.
Marking Value 1 – 8 An index to the Marking profile.
Default: 1
CE-VLAN Action Preserve
Update
Defines the CE VLAN action for the current flow.
Default: Preserve
Note: This parameter appears for UNI ports only..