Specifications

Appendix D Configuration Menus IPmux-11 Installation and Operation Manual
D-14 Configuring IPmux-11 at the Physical Level
• Line interface:
 DSU (DSU interface)
 CSU (CSU interface)
• Line length (DSU mode only, length of a cable in feet between the
IPmux-11 T1 port connector and the network access point):
 0–133
 133–266
 266–399
 399–533
 533–655
• Restoration time (time required for the T1 port to return to normal operation
after sync loss):
 TR-6211 (10 seconds)
 Fast (1 Second)
 Signaling mode:
 None
 Robbed Bit
Configuration>Physical layer>TDM (T1) configuration
Channel ID (1)
1. Admin status (Enable)
2. Transmit clock source >(Adaptive)
3. Line type >(ESF)
4. Line code >(B8ZS)
5. Line interface >(DSU)
6. Line length (feet) >(0-133)
7. Restoration time >(TR-621 (10 seconds))
8. Idle Code[0 - ff] ... (7E)
(N)
>
Please select item <1 to 15>
ESC-prev.menu; !-main menu; &-exit 1 Mngr/s
Figure D-19. TDM (T1) Configuration Menu (Page 1)