Specifications

Appendix D Configuration Menus IPmux-11 Installation and Operation Manual
D-8 Configuring System Parameters
Configuring User Access
IPmux-11 management software allows you to define new users, their
management and access rights. Only superusers (su) can create new users, the
regular users are limited to changing their current passwords, even if they were
given full management and access rights.

To add a new user:
1. Make sure that you logged in as su.
2. From the Management Access menu, select User access.
The User Access menu is displayed (see Figure D-12).
3. From the User Access menu, do the following:
 Select User name, and enter a name for a new user.
 Select Permission, and specify the user’s access rights (full control or
read-only).
 Select Access, and specify the user’s access methods (ASCII terminal,
Telnet, Web browser, Telnet and Web browser, or all of them).
 Select Old password, and enter your current superuser password.
 Select New password, and assign a password to a new user name.
 Select Confirm and re-enter the new user password to confirm it.
 Save new settings by typing S, when asked.

To delete an existing user:
• From the User Access menu, do the following:
 Type F or B to display a user that you intend to delete.
 Select Old password, and enter your current superuser password.
 Type D to delete the current user.
Configuration>System>Management>Management access>User access
1. User name ... (su)
2. Permission > (Full Control)
3. Access > (All)
4. Old password ... ()
5. New password ... ()
6. Confirmation ... ()
>
Please select item <1 to 6>
ESC-prev.menu; !-main menu; &-exit 1 Mngr/s
Figure D-12. User Access Menu