Specifications

IPmux-11 Installation and Operation Manual Appendix D Configuration Menus
Configuring System Parameters D-7
 Select Alarm trap, and choose On or Off to enable or disable alarm trap
receipt by the manager station.
 On – The alarm trap is sent to the management station informing of the
occurrence of any alarm which is not masked (see Masking Alarms
below). Both entry and exit from an alarm state are declared.
 Off – The alarm trap is not sent to the management station, even if the
alarm is masked.
 Select VLAN tagging, and choose On or Off to consider or ignore the
VLAN tagging of the management traffic coming from the management
station.
 Select VLAN ID, and enter the ID of the management station VLAN
(1–4095).
 Select VLAN priority, and enter the priority of the management station
VLAN (0–7).
Configuration>System>Management>Manager list
1. Manager IP address ... (0.0.0.0)
2. Manager location > (Empty)
3. Link up/down trap (On)
4. Alarm trap (Off)
5. VLAN tagging (Off)
6. VLAN ID ... (0)
7. VLAN priority ... (0)
>
Please select item <1 to 7>
ESC-prev.menu; !-main menu; &-exit 1 Mngr/s
Figure D-10. Manager List Menu
Defining Management Access
The user access rights, as well as Telnet and Web access authorization are
configured via the Management Access menu.

To access The Management Access menu:
• From the Management menu (Figure D-7), select Management access.
The Management Access menu is displayed (Figure D-11).
Configuration>System>Management>Management access
1. User access >
2. Telnet access > (Enable)
3. Web access > (Enable)
>
Please select item <1 to 3>
ESC-prev.menu; !-main menu; &-exit 1 Mngr/s
Figure D-11. Management Access Menu