Specifications

IPmux-11 Installation and Operation Manual Appendix D Configuration Menus
Configuring System Parameters D-5
Assigning a Name to IPmux-11 and Its Location
The IPmux-11 management software allows you to assign a name to the unit and
its location to distinguish it from the other devices installed in your system.

To assign a name to IPmux-11 and its location:
1. From the System menu (Figure D-5), select Management.
The Management menu is displayed (see Figure D-7).
2. From the Management menu, select Device info.
The Device Info menu appears (see Figure D-8).
3. From the Device Info menu, select System name and enter the desired name
for the IPmux-11 device.
4. Select System location, and enter the desired name for the current IPmux-11
location.
Configuration>System>Management
1. Device info >
2. Authentication/community >
3. Manager list >
4. Management access >
5. Alarm trap mask >
>
Please select item <1 to 5>
ESC-prev.menu; !-main menu; &-exit 1 Mngr/s
Figure D-7. Management Menu
Configuration>System>Management>Device info
1. System Name ... (IPmux-11)
2. System Location ... (Branch A)
>
Please select item <1 to 2>
ESC-prev.menu; !-main menu; &-exit 1 Mngr/s
Figure D-8. System Info Menu
Defining Read, Write and Trap Communities
You have to assign names for the read, write and trap communities. In addition,
you can enable sending the authentication failure trap, if a network manager from
an unauthorized community attempts to access IPmux-11.

To define read, write and trap communities:
1. From the Management menu, select Authentication/community.
The Authentication/Community menu appears (see Figure D-9).