Specifications

Appendix D Configuration Menus IPmux-11 Installation and Operation Manual

D-4 Configuring System Parameters

Configuring IP Host Parameters

IPmux-11 can be managed by a network management station, which is located on

the LAN connected to the one of the unit’s Ethernet ports. In order to establish a

proper connection, it is necessary to configure the following: host IP address,

subnet mask, default gateway, its trap, read and write communities.

DHCP client configuration is currently unavailable.



To define the IP parameters:

1. From the System menu, select Host IP.

The Host IP menu appears (see Figure D-6).

2. From the Host IP menu, perform the following:

 Select Host IP list to define the host IP address

 Select IP mask to define the host IP mask.

 Select Default gateway to set the default gateway IP address.

The default gateway must be in the same subnet as the host.

Configuration>System>Host IP

1. IP address ... (Empty)

2. IP mask ... (Empty)

3. Default gateway ... (0.0.0.0)

4. DHCP (Disable)

Please select item <1 to 4>

ESC-prev.menu; !-main menu; &-exit 1 Mngr/s

Figure D-6. Host IP Menu

Configuring Management Parameters

You can configure the following management parameters:

• Define system name and location

• Define read, write and trap communities

• Specify network managers

• Enable or disable management access via Telnet or Web browser

• Define alarm masks.

Note