Specifications

Chapter 4 Diagnostics and Troubleshooting IPmux-11 Installation and Operation Manual
4-4 Error Detection
Table 4-1. Event List
Event Description Corrective Action
COLD START IPmux-11 has been powered up None
CON LOCAL FAIL Ethernet frames are not received by the local
IPmux-1 on the specified connection
Check Eth/IP path
CON REMOTE FAIL Ethernet frames are not received by the remote
IPmux-11 on the specified connection
Check Eth/IP path
CON STANDBY Redundancy bundle connection is not the
active connection (only applies when
redundancy is used)
None
CON TDM FAIL LOS/LOF on the TDM line forced redundancy
switching (only applies when redundancy is
used)
Check the TDM line
CON SYNC Bundle connection failure has ended (only
applicable when OAM is Enabled)
None
CON UNAVAILABLE Remote IPmux is not available (only applicable
when OAM is Enabled)
Check the connection of the remote
IPmux
CON VALIDATION FAIL Connection is invalid (only applicable when
OAM is Enabled)
Check the bundle parameters
FATAL ERROR IPmux-11 has encountered an internal fatal
error
The IPmux-11 requires servicing
INVALID LOGIN VIA
TERMINAL
Invalid user name or password was entered,
when attempting to access IPmux-11 via local
terminal
None
INVALID LOGIN VIA WEB Invalid user name or password was entered,
when attempting to access IPmux-11 via Web
browser
None
INVALID LOGIN VIA
TELNET
Invalid user name or password was entered,
when attempting to access IPmux-11 via Telnet
None
IP ADDRESS IS ASSIGNED
BY SERVER
Host IP has been learned by the DHCP
protocol
None
IP ADDRESS IS RELEASED Host IP has been relesased by the DHCP
protocol
Check the connection with the DHCP
server
JIT BUF OFLOWS END
BUNDLE 1
Jitter Buffer Overflows END
(see
Configuring the Bundle Statistic
Collection
below)
–
JIT BUF OFLOWS START
BUNDLE 1
Jitter Buffer Overflows START
(see
Configuring the Bundle Statistic
Collection
below)
Increase jitter buffer size
JIT BUF UFLOWS END
BUNDLE 1
Jitter Buffer Underflows END
(see
Configuring the Bundle Statistic
Collection
below)
–
JIT BUF UFLOWS START
BUNDLE 1
Jitter Buffer Underflows START
(see
Configuring the Bundle Statistic
Collection
below)
Increase jitter buffer size