Specifications

Chapter 1 Introduction IPmux-11 Installation and Operation Manual
1-4 Physical Description
Management
IPmux-11 can be managed locally by connecting an ASCII terminal to the
RS-232 port on the rear panel, or via HTTP connection (Web-based management
tool, ConfiguRAD), Telnet or SNMP. The SNMP management capability enables
fully graphical, user-friendly management using the RADview Service Center
TDMoIP network management stations offered by RAD, as well as management by
other SNMP-based management systems.
ConfiguRAD
ConfiguRAD is user-friendly Web-based terminal management system serving for
remote device configuration and maintenance. It is embedded into IPmux-11 and
provided at no extra cost. ConfiguRAD can be run from any standard Web
browser.
Timing
IPmux-11 maintains synchronization between TDM devices by deploying
advanced clock distribution mechanisms.
Available timing modes are:
• Loopback
• Adaptive
• Internal clock
• External clock.
1.2 Physical Description
IPmux-11 is a compact easy-to-install standalone unit. A rack mounting kit option
is available (ordered separately).
Figure 1-2 shows a 3-dimensional view of IPmux-11.
Figure 1-2. IPmux-11 3D View
The front panel includes the IPmux-11 LEDs status. For the detailed LED
description, see Chapter 3.
User, network, external clock and management ports, and power supply
connector are located on the rear panel of unit. For further details, see Chapter 2.