Specifications

Appendix D Configuration Menus IPmux-11 Installation and Operation Manual
D-22 Displaying IPmux-11 Status
Monitoring>Status>Physical layer
Channel > (Network-Eth1)
Mode > (Full Duplex)
Rate(Mbps) > (100)
Status > (Connected)
>
F - forward
ESC-prev.menu; !-main menu; &-exit 1 Mngr/s
Figure D-30. Physical Layer Screen
Displaying the Bundle Connection Information
You can display information on the current bundle connection, its connectivity
status, collected sequence errors, and statistics for underflows and overflows of the
jitter buffer (see Chapter 4 for details on the bundle statistics).

To display the bundle connection information:
• From the From the Status menu, select Connection.
The Connection screen is displayed (see Figure D-31).
Monitoring>Status>Connection
Destination IP address: (1.1.1.1)
Next hop MAC address: (000000000000)
Connectivity status: > (OK)
Sequence errors: (0)
Jitter buffer underflows: (0)
Jitter buffer overflows: (0)
1. Bundle ID ... (1)
>
ESC-prev.menu; !-main menu; &-exit 1 Mngr/s
Figure D-31. Connection Screen