Specifications

IPmux-11 Installation and Operation Manual Appendix D Configuration Menus
Displaying IPmux-11 Status D-21
D.7 Displaying IPmux-11 Status
The IPmux-11 software allows to display information on the physical layer and
bundle connections. This section describes only status information of the IPmux-11
device. For description of IPmux-11 alarms, refer to Chapter 5.
The status information is available via the Status menu.

To access the Status menu:
1. From the Main menu, select Monitoring.
The Monitoring menu appears (see Figure D-28).
2. From the Monitoring menu, select Status.
The Status menu appears (see Figure D-29).
Monitoring
1. Statistics >
2. Status >
3. Event log >
>
Please select item <1 to 3>
ESC-prev.menu; !-main menu; &-exit 1 Mngr/s
Figure D-28. Monitoring Menu
Monitoring>Status
1. Physical layer >
2. Connection >
>
Please select item <1 to 2>
ESC-prev.menu; !-main menu; &-exit 1 Mngr/s
Figure D-29. Status Menu
Displaying the Physical Layer Information
You can view the status of the Ethernet connections at the physical level.

To display the physical layer information:
1. From the Status menu, select Physical layer.
The Physical Layer screen is displayed (see Figure D-30).
2. From the Physical Layer screen, type F to toggle between the available
Ethernet interfaces.