Specifications

Installation and Operation Manual Chapter 4 Configuration
IPmux-8/16 Ver. 6.00 Configuring IPmux-8/16 for Operation 4-25
Table 4-1. Bundle IDs for Internal T1s in Channelized T3 Interface (Cont.)
Internal T1 Bundle ID
8 57
9 65
10 73
11 81
12 89
13 97
14 105
15 113
16 121
17 129
18 137
19 145
20 153
21 161
22 169
23 177
24 185
25 193
26 201
27 209
28 217
When an additional CT3 module is installed in slot 4, bundle ID range for
its internal T1s starts with ID 249 and incremented by 8 for each additional
bundle. For example, 249, 257, 265, ..., 457, 465
 Connection Status
 Enable (connection is enabled)
 Disable (no frames are sent on this connection)
Disable Connection Status before changing the following parameters:
• Destination IP Address
• Next Hop
• Destination Bundle.
 Destination IP Address (IP address of the destination device):
 0.0.0.0 to 255.255.255.255.
Note