Specifications

Installation and Operation Manual Chapter 4 Configuration
IPmux-8/16 Ver. 6.00 Configuring IPmux-8/16 for Operation 4-13
Bridge Configuration
1. Aging time >
2. Erase MAC table
3. VLAN Configuration >
ESC. Exit
Current Slot 2
Select item from the menu.
Figure 4-7. Bridge Configuration Menu
Defining VLANs
Bridge ports of the 4-port Ethernet modules can be defined as members of existing
VLANs.
Path: Main > Configuration > Physical Layer Configuration > Slot # 1/2 > Bridge
Configuration > VLAN Configuration.

To define bridge ports as VLAN members:
1. Follow the path above to access the VLAN Configuration menu (
Figure 4-8).
2. From the VLAN Configuration menu, configure the following:
 Channel
 Network-Eth1
 User1-Eth2
 User2-Eth3
 VLAN ID (Specifies VLAN, which the current bridge port will be a member
of): 1–4095
 Status
 Enable (Adds the current port as a VLAN member)
 Disable (Disables VLAN membership of the current port)
VLAN Configuration
1. Channel Network
2. VLAN ID 0
3. Status Disable
>
ESC. Exit
Current Slot 2
Select item from the menu.
Figure 4-8. VLAN Configuration Menu