Specifications

Chapter 4 Configuration Installation and Operation Manual
4-12 Configuring IPmux-8/16 for Operation IPmux-8/16 Ver. 6.00
LAN Physical Layer Configuration
1. Channel Network
2. Channel State Enable
3. Auto Negotiation Enable
4. Max Capability Advertised 100baseT Full Duplex
5. Default Type 100baseT Full Duplex
6. VLAN Tagging Transparent
7. Default VLAN ID 1
8. Default VLAN Priority 0
9. Rate Limit(Kbps) 128 kbps
ESC. Exit N. Next
Current Slot/Channel is 1 /Network
Select item from the menu.
Figure 4-6. LAN Physical Layer Configuration Menu
Configuring Ethernet Bridge
4-port Ethernet modules contain internal bridge where with three ports is used as
the user ports, and the fourth is used as an Ethernet network port.
Path: Main > Configuration > Physical Layer Configuration > Slot # 1/2 > Bridge
Configuration.

To configure Ethernet bridge:
1. Follow the path above to display the Bridge Configuration menu (
Figure 4-7).
2. From the Bridge Configuration menu, do the following:
 Select Aging time and define a period of time in seconds from the moment
when a node is disconnected from the network segment or becomes
inactive and removal of the node address from the database.
 Select Erase MAC table, if you intend to delete all learned addresses from
the MAC table.