Specifications

Chapter 4 Configuration Installation and Operation Manual
4-8 Configuring IPmux-8/16 for Management IPmux-8/16 Ver. 6.00

To configure the terminal control port:
1. Follow the path above to access the ASCII Terminal Configuration menu
(
Figure 4-5).
2. From the ASCII Terminal Configuration menu, configure the following:
 Display Mode (ASCII terminal display mode)
 Color
 MonoChrome 3 color
 MonoChrome 2 color
 Baud Rate (in bps)
 9600
 19200
 38400
 57600
 115200
If you change the baud rate of the IPmux-8/16 control port, make sure to change
the rate of the ASCII terminal to match the new setting.
 Change password (assigning a new password to an existing user)
 Hard Flow Ctrl (hardware flow control)
 On (Hardware flow control is enabled)
 Off (Hardware flow control is disabled)
 Security Timeout T (A time interval after which IPmux-8/16 automatically
exits to the password entry screen if no input from the user is detected for
15 minutes)
 On (Security timeout is enabled)
 Off (Security timeout is disabled)
Note