Specifications

Chapter 3 Operation Installation and Operation Manual
3-10 Configuration Alternatives IPmux-8/16 Ver. 6.00
Configuration
Physical Layer Configuration
Channelized T3 Physical Layer Configuration CT3 EXT. Physical Layer Configuration
CT3 T1 Physical Layer Configuration
1. General Configuration
2. Physical Layer Configuration
3. Timeslots Configuration
4. Bundle Connection
Configuration
5. IP Support
6. Ethernet Redundancy
7. Protection Switching
Configuration
8. Configuration Summary
9. OOB MNG Physical Layer
Configuration
(IPmux-16 only)
1. Slot #1 - ETH SWITCH UTP
2. Slot #2 - ETHERNET UTP
3. Slot #3 - CT3
4. Slot #4 - CT3
1. CT3 Ext.
2. CT3 T1 1..7
3. CT3 T1 8..14
4. CT3 T1 15..21
5. CT3 T1 22..28
1. Channel Status
2. Line Type
3. Transmit Clock Source
4. Loopback State
5. Uplink Fail Alarm Behavior
1. Channel Status
2. Line Type
3. Restore Time
4. Loopback State
5. Transmit Clock Source
Figure 3-10. Configuration > Physical Layer Configuration (Channelized T3 Modules)
Configuration
Timeslot Configuration
Bundle Connection Configuration
IP Support
1. General Configuration
2. Physical Layer Configuration
3. Timeslots Configuration
4. Bundle Connection
Configuration
5. IP Support
6. Ethernet Redundancy
7. Protection Switching
Configuration
8. Configuration Summary
9. OOB MNG Physical Layer
Configuration
(IPmux-16 only)
1. Slot/Channel
2. Bundle Number
3. Time slot number
4. Time slot Current Status
1. DS0 Bundle ID
2. Connection Status
3. Destination IP Address
4. Next Hop
5. Destination Bundle
6. Jitter Buffer (x10 usec)
7. TDM bytes in frame (x48 bytes)
8. OAM Connectivity
9. Redundancy Function
A. VLAN ID
B. VLAN Priority
C. Protocol Version
1. IP ToS
Figure 3-11. Configuration > Timeslot Configuration, Bundle Connection Configuration, IP Support
Configuration
Ethernet Redundancy Configuration
OOB MNG Physical Layer Configuration
Protection Switching Configuration
1. General Configuration
2. Physical Layer Configuration
3. Timeslots Configuration
4. Bundle Connection
Configuration
5. IP Support
6. Ethernet Redundancy
7. Protection Switching
Configuration
8. Configuration Summary
9. OOB MNG Physical Layer
Configuration
(IPmux-16 only)
1. Redundancy
2. Recovery
3. Wait to Restore
4. Enforced LAN
1. Default Type
1. Primary Bundle ID
2. Secondary Bundle ID
3. Redundancy Type
8. Local Fail Time
9. Force Connection
A. Recovery
B. Wait-To-Restore Time
Figure 3-12. Configuration > Ethernet Redundancy, Protection Switching Configuration
Main Menu Performance Monitoring
1. System
2. Configuration
3. Performance Monitoring
4. Exit
1. Physical Port Statistics
2. Bundle Connection Status
3. Bundle Connection Statistics
Figure 3-13. Main Menu > Performance Monitoring