Specifications

Chapter 3 Operation Installation and Operation Manual
3-8 Configuration Alternatives IPmux-8/16 Ver. 6.00
Choosing Options
 To choose an option:
1. Type the number corresponding to the option, and press <Enter>.
2. Press <Spacebar> to toggle between the available values.
3. Press <Enter> when the required value is displayed.
Saving Changes
 To save changes in the configuration:
• Type S to save the changes that were made to the IPmux-8/16 configuration.
Overview of Menu Operations
Use these menu trees as a reference aid while performing configuration and
control functions. Chapter 4 illustrates menus and explains parameters.
Main Menu System Event Log
1. System
2. Configuration
3. Performance Monitoring
4. Exit
1. General Information
2. Reset
3. Event Log
4. Ping
5. Trace Route
1. Read logfile
2. Clear logfile
3. Update Bundle Connection Events
4. Bundle Connection Events Threshold
Figure 3-5. Main Menu > System > Event Log
Configuration General Configuration
Management Configuration
ASCII Terminal Configuration
Time/Date Update
Software Download/Upload
File System
Download/Upload using XMODEM
Download/Upload using TFTP
Host Configuration
Manager List
Default Gateway
Alarm Trap Mask
1. General Configuration
2. Physical Layer Configuration
3. Time slots Configuration
4. Bundle Connection
Configuration
5. IP Support
6. Ethernet Redundancy
7. Protection Switching
Configuration
8. Configuration Summary
9. OOB MNG Physical Layer
Configuration
(IPmux-16 only)
1. Management Configuration
2. ASCII Terminal Configuration
3. Time/Date Update
4. Download/Upload
5. Set Default Parameters
6. File System
7. System Name
8. System Location
1. Authentication/Community
2. Host Configuration
3. Manager List
4. Default Gateway
5. Alarms Traps MASK
6. Telnet Access
7. SNMP Access
1. Display Mode
2. Baud Rate
3. Change Password
4. 15 min. Timeout
5. Hard flow ctrl (RTS/CTS)
1. Set Time
2. Set Date
1. Download/Upload
using XMODEM
2. Download/Upload
using TFTP
1. Dir (System Files)
2. Dir (History Files)
3. Dir (User Files)
4. Copy
5. Rename
6. Delete
7. Print Code-File Info
8. Format Flash
1. File
1. File Name
2. Command
3. Server IP
4. Retry Timeout
5. Total Timeout
6. User File Name
7. View Transfer Status
1. Authentication Failure Trap
2. Trap
3. Read
4. Write
1. Host Index
2. IP Address
3. IP Mask
4. Default Next Hop
5. Vlan Tagging
6. Default Vlan ID
7. Default Vlan Priority
1. Manager IP Address
2. Host Index
3. Manager Location
4. Next Hop
5. Link Up/Down Trap
6. Alarm Trap
7. System Trap
8. VLAN ID
9. VLAN Priority
1. Gateway IP
1. Alarm ID
2. Trap status
Figure 3-6. Configuration > General Configuration